/media/DISK_A1/system/root # saned -d128
[saned] main: starting debug mode (level 128)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned from sane-backends 1.0.22 ready
[saned] do_bindings: trying to get port for service "sane-port" (getservbyname)
[saned] do_bindings: "sane-port" service unknown on your host; you should add
[saned] do_bindings:      sane-port 6566/tcp saned # SANE network scanner daemon
[saned] do_bindings: to your /etc/services file (or equivalent). Proceeding anyway.
[saned] do_bindings: socket ()
[saned] do_bindings: setsockopt ()
[saned] do_bindings: bind ()
[saned] do_bindings: listen ()
[saned] run_standalone: waiting for control connection
[saned] handle_connection: processing client connection
[saned] check_host: access by remote host: 192.168.1.10
[saned] check_host: remote host is not IN_LOOPBACK
[saned] check_host: local hostname: KEENETIC_GIGA_II
[saned] check_host: local hostname (from DNS): KEENETIC_GIGA_II
[saned] check_host: local host address (from DNS): 192.168.1.1
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `192.168.1.1/24'
[saned] check_host: subnet with base IP = 192.168.1.1, CIDR netmask = 24
[saned] check_host: access granted from IP address 192.168.1.10 (in subnet 192.168.1.1/24)
[saned] init: access granted
[saned] init: access granted to saned@192.168.1.10
[saned] process_request: waiting for request
[saned] process_request: got request 1
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited

[usb] 0x04A9 0x2220
device /dev/usbscanner

/media/DISK_A1/system/root # sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

  # No USB scanners found. If you expected something different, make sure that
  # you have loaded a kernel driver for your USB host controller and have setup
  # the USB system correctly. See man sane-usb for details.
  # SANE has been built without libusb support. This may be a reason
  # for not detecting USB scanners. Read README for more details.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

12 фев 14:53:06    saned[2052]    saned from sane-backends 1.0.22 ready
12 фев 14:53:06    saned[2052]    check_host: getpeername failed: Socket operation on non-socket
12 фев 14:53:06    saned[2052]    init: access by host [error] denied
12 фев 14:53:06    saned[2052]    saned exiting

/media/DISK_A1/system/root # lsusb
Bus 002 Device 004: ID 04a9:2220 Canon, Inc. CanoScan LIDE 25
Bus 001 Device 002: ID 0bc2:2312 Seagate RSS LLC
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

server = /media/DISK_A1/opt/sbin/saned